BMW MG1 / MD1 bench connection
Five-wire bench pinout shared across the BMW and MINI Bosch MG1 / MD1 families — petrol and diesel, from 1.5-litre three-cylinders to 3.0-litre sixes.
Connection reference
ECU bench and boot pinouts
Connector positions, power feeds, CAN connections and boot-pin locations. Filter by vehicle make and ECU family to find the reference for your unit. Each guide identifies the connection method and supported operation.
Ford MEDG17.0 boot connection
Connector reference, board overview and boot-pin close-up for the Ford Bosch MEDG17.0. Read protocol verified by Redline Autohaus.
Porsche SDI6 bench connection
Six-wire bench connection with three power feeds, ground and CAN High / Low on B2. Numbered connector diagram and Redline ECU Suite setup instructions.
Hyundai / Kia SIM2K-241 bench and boot connection
Two connector options with matching board overviews and boot-pin close-ups. Redline diagrams show power, ground and the main CAN pair for each SIM2K-241 layout.
9 ECU families covered. Always identify the ECU by its part number before wiring — the same chassis can carry different DME generations by build date and market.